As the core components of the "three electric" of new energy vehicles, a large number of die-cast aluminum alloy materials are used. Friction stir welding has very good sealing and low production cost. At present, almost all new energy vehicles use friction stir welding technology for the sealing of waterways.
It can realize the welding of cast aluminum + plate, cast aluminum + profile, cast aluminum + cast aluminum, and special structure (deep cavity structure).
Mixing head characteristics
· Welding speed > 300mm/min
· Life of a single mixing head > 800m
· Welding cost < 1 yuan /m
| Model | L1 | D | L | L2 |
|
T-5012030-25 |
Standard 50mm（customizable） |
12mm | 3mm | 25mm |
|
Note: The first 2 digits of the model indicate L1 length, the last 3 digits indicate the needle length L (i.e. the welding depth), the middle 2 digits D indicate the diameter of the shaft shoulder, and the tail 25 indicates the height of the avoidance |
||||
| ※ Note: Special mixing head can be customized for special product structure | ||||
| Model | L1 | D | L | L2 |
|
T-5012030-25 |
Standard 50mm（customizable） |
12mm | 3mm | 25mm |
|
Note: The first 2 digits of the model indicate L1 length, the last 3 digits indicate the needle length L (i.e. the welding depth), the middle 2 digits D indicate the diameter of the shaft shoulder, and the tail 25 indicates the height of the avoidance |
||||
| ※ Note: Special mixing head can be customized for special product structure | ||||
FSW Technology Development (Beijing) Co., LTD All rights reserved Disclaimer ICPRecord number：Beijing ICP prepared 18026112-1